Stanlux Gold

Pigments known as bronze powder, constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. Beside the copper coloured characteristic, the different alloys generate the traditional golden colours: rich gold, rich pale gold, pale gold and ducate gold. These metallic pigments generate very attractive decorative metallic effects, with extended use in printing inks, adding sophistication to packages, labels and decorative product lines in general. This product line does not provide protective characteristics to the paints, it is just for decorative proposes.

Grade Water Coverage
(cm²/g Min.)
Available Shades**GranulometryComments
Average Size*
(microns)
Retention
(% Max.)
Sieve
(Mesh)
2000 1.900 - 2.600C - P - RP - R501,00120

Coarse types recommended for applications where high brilliance is required. The 2100 grades present superior brilliance in comparison with the 2000 grades.

2700 2.000 - 3.000C - P - RP - R451,00120

These coarse types present brilliance and opacity. The 2800 grades present superior brilliance in comparison with the 2700 grades, and the same comparison is valid for 3600 with 3500.

2800 2.500 - 3.500C - P - RP - R451,00120

These coarse types present brilliance and opacity. The 2800 grades present superior brilliance in comparison with the 2700 grades, and the same comparison is valid for 3600 with 3500.

3500 3.000 - 4.300P - RP - R350,50120

These coarse types present brilliance and opacity. The 2800 grades present superior brilliance in comparison with the 2700 grades, and the same comparison is valid for 3600 with 3500.

4500 4.300 - 5.400P - RP - R251,50200

These products have a wide range of applications, based on good balance in brilliance and hiding power. The 4600 grades present superior brilliance in comparison with the 4500 grades.

4500 3.400 - 4.200C251,50200

These products have a wide range of applications, based on good balance in brilliance and hiding power. The 4600 grades present superior brilliance in comparison with the 4500 grades.

4500 3.400 - 4.200D308,00200

These products have a wide range of applications, based on good balance in brilliance and hiding power. The 4600 grades present superior brilliance in comparison with the 4500 grades.

4600 3.400 - 4.200C301,50200

These products have a wide range of applications, based on good balance in brilliance and hiding power. The 4600 grades present superior brilliance in comparison with the 4500 grades.

4600 4.300 - 5.400P - RP - R301,50200

These products have a wide range of applications, based on good balance in brilliance and hiding power. The 4600 grades present superior brilliance in comparison with the 4500 grades.

6500 5.500 - 6.500P - RP - R205,00325

These products can offer a regular surface finishes with high hiding power.

7500 6.300 - 7.500C - P - RP - R180,80325

These products can offer a regular surface finishes with high hiding power.

Stanlux Paste Leafing

Aluminium paste, leafing type, composed by lamellar particles covered with stearic acid. This product line has as characteristic the particles orientation in the uppermost layer of the paint film, applied and positioned in a multi-layer form parallel to the substrate. This orientation provides a unique esthetic shiny effect that provides the applied system with a protective barrier, good coverage, corrosion resistance, thermal reflection, etc.

Grade Solids
(% ± 2%)
Leafing
(% Min.)
Water Coverage
(cm²/g Min.)
GranulometrySolvent**Comments
Average Size*
(microns)
> 325 Mesh
% Max.
120 657020.000171,0WS / HA

With high leafing value these grades are widely used for durable and protective paints. The Stanlux Paste 130N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.

130 657021.000191,0WS / HA

With high leafing value these grades are widely used for durable and protective paints. The Stanlux Paste 130N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.

130N 657021.000191,0HA

With high leafing value these grades are widely used for durable and protective paints. The Stanlux Paste 130 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.

140 657021.000191,0WS / HA

With high leafing value these grades are widely used for durable and protective paints. The Stanlux Paste 130N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.

166 657522.000151,0WS / HA

Medium particle size, clear and brilliant.

200 656020.000140,1WS / HA

Products with high hiding power that generate finishes with regular surface.

Stanlux Paste Non-Leafing

Aluminiun paste, non-leafing type, made of lamellar particles covered with oleic acid. This product line has as characteristic the particle orientation in the middle layer of the paint film, applied in and positioned in a multi-layer form parallel to the substrate. This orientation provides differentiated effects that adds a metallic shine to the applied system, besides allowing dying with highly transparent pigments, which can generate finishing in silver or in a large range of metallic colours.

Grade Solids
(% ± 2%)
GranulometrySolvent**Comments
Average Size*
(microns)
> 325 Mesh
% Max.
1130 65130,5WS / HA

This product presents excellent metallic effect and high hiding power.

1600 65231,0WS / HA

These products are considered “standard” level and can be used for coloured metallic paints. The grades 1600 and 1700 present differentiated metallic effect into this group of products. The Stanlux Paste 1600 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.

1600N 65231,0HA

These products are considered “standard” level and can be used for coloured metallic paints. The grades 1600 and 1700 present differentiated metallic effect into this group of products. The Stanlux Paste 1600 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.

1700 65211,0WS / HA

These products are considered “standard” level and can be used for coloured metallic paints. The grades 1600 and 1700 present differentiated metallic effect into this group of products. The Stanlux Paste 1600 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.

1770 65161,0WS / HA

These products are considered “standard” level and can be used for coloured metallic paints. The grades 1600 and 1700 present differentiated metallic effect into this group of products. The Stanlux Paste 1600 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.

1770/60 60161,0WS / HA

These products are considered “standard” level and can be used for coloured metallic paints. The grades 1600 and 1700 present differentiated metallic effect into this group of products. The Stanlux Paste 1600 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.

2000 65210,5WS / HA

Product with medium particles size and differentiated metallic effect.