Aluminium paste, leafing type, composed by lamellar particles covered with stearic acid.
This product line has as characteristic the particles orientation in the uppermost layer of the paint film, applied and positioned in a multi-layer form parallel to the substrate.
This orientation provides a unique esthetic shiny effect that provides the applied system with a protective barrier, good coverage, corrosion resistance, thermal reflection, etc.
-
- Grade
- Typical uses
- MSDS
- TDS
Grade | Solids (% ± 2%) | Leafing (% Min.) | Water Coverage (cm²/g Min.) | Granulometry | Solvent** | Comments | |
Average Size* (microns) | > 325 Mesh % Max. | ||||||
100 | 65 | 60 | 14.000 | 18 | 1,0 | WS / HA | The Stanlux Paste 100N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings. |
100N | 65 | 60 | 14.000 | 18 | 1,0 | HA | The Stanlux Paste 100 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings. |
120 | 65 | 70 | 20.000 | 17 | 1,0 | WS / HA | With high leafing value these grades are widely used for durable and protective paints. The Stanlux Paste 130N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings. |
130 | 65 | 70 | 21.000 | 19 | 1,0 | WS / HA | With high leafing value these grades are widely used for durable and protective paints. The Stanlux Paste 130N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings. |
130N | 65 | 70 | 21.000 | 19 | 1,0 | HA | With high leafing value these grades are widely used for durable and protective paints. The Stanlux Paste 130 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings. |
140 | 65 | 70 | 21.000 | 19 | 1,0 | WS / HA | With high leafing value these grades are widely used for durable and protective paints. The Stanlux Paste 130N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings. |
140 OP | - | 70 | 21000 | 15 | 1,0 | PO | Masterbatch for plastics. |
150 | 65 | 70 | 14.000 | 19 | 4,0 | WS / HA | Medium-coarse particle size and high metallic effect. |
166 | 65 | 75 | 22.000 | 15 | 1,0 | WS / HA | Medium particle size, clear and brilliant. |
200 | 65 | 60 | 20.000 | 14 | 0,1 | WS / HA | Products with high hiding power that generate finishes with regular surface. |
260 | 65 | 70 | 28.000 | 14 | 0,1 | WS / HA | With fine particle size these grades are specially indicated for printing inks. |
260 OP | - | 70 | 28000 | 12 | 0.1 | PO | Masterbatch for plastics. |
266 | 65 | 70 | 28.000 | 14 | 0,1 | WS / HA | With fine particle size these grades are specially indicated for printing inks. |
270/70IPA | 70 | 70 | 30.000 | 11 | 1,0 | IPA | These are the finest leafing grades, with specific solvent for typical uses and low odour property. |
280 | 65 | 70 | 34.000 | 12 | 0,1 | WS / HA | With fine particle size these grades are specially indicated for printing inks. |
290 EA | 65 | 70 | 45.000 | 9 | 0,1 | EA | These are the finest leafing grades, with specific solvent for typical uses and low odour property. |
290 60MO | 60 | 70 | 45.000 | 9 | 0,1 | MO | These are the finest leafing grades, with specific solvent for typical uses and low odour property. |
340N | 65 | 70 | 9.000 | 21 | 7,0 | HA | The coarse particles provide a good reflection effect or barrier protection. |
* Average size characteristic measured in Mastersizer E - Malvern equipment and means to D 50 value.
** Solvent -
WS White Spirit |
HA High Aromatic |
MO Mineral Oil |
EA Ethyl Acetate |
PO Paraffin Oil |
IPA Isopropyl Alcohol.
The products only with high aromatic solvent are specially recommended for formulation systems with low tolerance to aliphatic solvent, like some used for maintenance, protective or marine coatings.