Products Applications Aerosol spray decorative paints
Pigments known as bronze powder, constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. Beside the copper coloured characteristic, the different alloys generate the traditional golden colours: rich gold, rich pale gold, pale gold and ducate gold. These metallic pigments generate very attractive decorative metallic effects, with extended use in printing inks, adding sophistication to packages, labels and decorative product lines in general. This product line does not provide protective characteristics to the paints, it is just for decorative proposes.
-
- Grade
- Typical uses
- MSDS
- TDS
-
-
-
-
-
| Grade |
Water Coverage
(cm²/g Min.) | Available Shades** | Granulometry | | Comments |
Average Size*
(microns) | Retention
(% Max.) | Sieve
(Mesh) |
| 4500 |
4.300 - 5.400 | P - RP - R | 25 | 1,50 | 200 | These products have a wide range of applications, based on good balance in brilliance and hiding power. The 4600 grades present superior brilliance in comparison with the 4500 grades.
|
| 4500 |
3.400 - 4.200 | C | 25 | 1,50 | 200 | These products have a wide range of applications, based on good balance in brilliance and hiding power. The 4600 grades present superior brilliance in comparison with the 4500 grades.
|
| 4500 |
3.400 - 4.200 | D | 30 | 8,00 | 200 | These products have a wide range of applications, based on good balance in brilliance and hiding power. The 4600 grades present superior brilliance in comparison with the 4500 grades.
|
| 6500 |
5.500 - 6.500 | P - RP - R | 20 | 5,00 | 325 | These products can offer a regular surface finishes with high hiding power.
|
| 7500 |
6.300 - 7.500 | C - P - RP - R | 18 | 0,80 | 325 | These products can offer a regular surface finishes with high hiding power.
|
Aluminium paste, leafing type, composed by lamellar particles covered with stearic acid.
This product line has as characteristic the particles orientation in the uppermost layer of the paint film, applied and positioned in a multi-layer form parallel to the substrate.
This orientation provides a unique esthetic shiny effect that provides the applied system with a protective barrier, good coverage, corrosion resistance, thermal reflection, etc.
-
- Grade
- Typical uses
- MSDS
- TDS
-
-
-
| Grade |
Solids
(% ± 2%) | Leafing
(% Min.) | Water Coverage
(cm²/g Min.) | Granulometry | Solvent** | Comments |
Average Size*
(microns) | > 325 Mesh
% Max. |
| 260 |
65 | 70 | 28.000 | 13 | 0,1 | WS / HA | With fine particle size these grades are specially indicated for printing inks.
|
| 266 |
65 | 70 | 28.000 | 13 | 0,1 | WS / HA | With fine particle size these grades are specially indicated for printing inks.
|
| 280 |
65 | 70 | 34.000 | 11 | 0,1 | WS / HA | With fine particle size these grades are specially indicated for printing inks.
|
Aluminiun paste, non-leafing type, made of lamellar particles covered with oleic acid.
This product line has as characteristic the particle orientation in the middle layer of the paint film, applied in and positioned in a multi-layer form parallel to the substrate.
This orientation provides differentiated effects that adds a metallic shine to the applied system, besides allowing dying with highly transparent pigments, which can generate finishing in silver or in a large range of metallic colours.
-
- Grade
- Typical uses
- MSDS
- TDS
-
-
-
-
| Grade |
Solids
(% ± 2%) | Granulometry | Solvent** | Comments |
Average Size*
(microns) | > 325 Mesh
% Max. |
| 1600N |
65 | 23 | 1,0 | HA | These products are considered “standard” level and can be used for coloured metallic paints. The grades 1600 and 1700 present differentiated metallic effect into this group of products. The Stanlux Paste 1600 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.
|
| 1700 |
65 | 21 | 1,0 | WS / HA | These products are considered “standard” level and can be used for coloured metallic paints. The grades 1600 and 1700 present differentiated metallic effect into this group of products. The Stanlux Paste 1600 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.
|
| 1770 |
65 | 16 | 1,0 | WS / HA | These products are considered “standard” level and can be used for coloured metallic paints. The grades 1600 and 1700 present differentiated metallic effect into this group of products. The Stanlux Paste 1600 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.
|
| 1770/60 |
60 | 16 | 1,0 | WS / HA | These products are considered “standard” level and can be used for coloured metallic paints. The grades 1600 and 1700 present differentiated metallic effect into this group of products. The Stanlux Paste 1600 N is specially recommended for formulation systems with low tolerance to aliphatic solvent, like used for maintenance, protective or marine coatings.
|
